The simple & robust design, quality of materials & workmanship guarantee long & effective seMce. These pumps ore suitable for the handling of dear & light liquids such as water, petrol, diesel S all fuels, paraffin, alcohol, light chemical solutions & edible oils etc. The only hand pumps safe for use with hot liquids up to 80°C (176° F).
Application of 'SKL' Pump
- Petro Chemical Industry.
- Marine Applications.
- Construction Industry.
- Agricultural Industry.
- Garage Equipment.
- Reliable Back-Up for Electrical Pumps.
- Application: Water Heaters (Gas & Electric)
- Range: 3O°C to 9O°C
- Stem Length: 50mm
- Connection Type: Press fit
- Colour Code: Cold - Warm - Hot - Very Hot
- Type: Round, Rectangular.
CNG Dispenser Digital 2200-i/2100-iState of the Art CNG Dispenser incorporates. + The most advanced CNG 50 mass flow meter from Micromotion.
+ Large 15” LCD TFT Touch Panel Display ± 60 Viewing Angle IP 65
+ State of the art human interface. (Input & Output)
+ Micro Processor Controlled.
+ Pie set amount fill in Rs Measuring accuracy > 98.5%
+ Max. Pr fill auto cutoff
+ Low flow rate auto cutoff . Over flow safety cutoff
+ 100% Transaction record, receipt printing. (Optional)
+ Network remote access & data retrieval. (Optional)
+ Full transaction record by date.
+ Totalizer Powerful Manager menu for data processing (Code protected)
+ User friendly parameter setting.
+ Fast fill 1/2” line & hose.
+ Omni directional quick disconnect fill hose breakaway.
+ Progressive LM.H. Pressure filling & status display.
+ Selection of Filling Nozzles
+ Backed by one year Warranty and Country wide after sales service support.
+ Artificially intelligent self test and diagnostics.
+ Leakage flow detection during stand by mode.
CNG Dispenser Digital 1200-i/1100-iStandard CNG Dispenser incorporates. + The most advanced CNG SO mass flow meter from Micromotion.
+ Large 1” LCD (with back light)
+ Micro Processor control.
+ Pre set amount fill in Rs. Measuring accuracy> 98%
+ Max. Pr fill auto cutoff.
+ Low flow rate auto cutoff, Over flow safety cutoff.
+ Independent Totalizers on each &de of Rs. kg.
+ User friendly parameter settings like rate change.
+ Fast fill 1/2“ Line & hose,
+ Omni directional quick disconnect fill hose breakaway.
+ Progressive L.M,H, pressure filling & status display.
+ Selection of Filling Nozzles.
+ Leakage flow detection during stand by mode.
+ Backed by one year warranty and country wide after sales service support.
General Specifications+ Two hose, both side independent fill controlled display.
+ Vehicle tank start & final Pr, Monitoring
+ Manual Isolation valve
+ Pr, Regulator for max 200 bar filling
+ Emergency power shutoff button.
+ Electrically conductive 5000 ps max working pressure hose.
+ Vent Muffler (defuser), Vent recovery line (Optional)
+ Cold rolled backea parted body, SS-Body (Optional)
+ Three line system-progressive, medium and hi pressure filling.
+ Independent solenoid and NRV on each line.
+ 4’ Pressure Gauge
+ 10 ft filling hose
CNG Dispenser Digital 4200-i/4100-i.Technical Specifications + 077 kg/min to 100 kg/min (subject to filling conditons)
+ Coalescing filters on all three lines.
+ L.M.H SOL. block for max rate with independent non return in each line
+ 4’ Pressure Gauge 400 bar max.
+ The Ambient operating temperature range is: -20°C to 60°C
+ Quick disconnect breakaway
Technical Parameters.+ Medium to Meter: Compressed Natural Gas + Flow rate: Qmax = 100Kg /min
+ Maximum Medium Temperature: 40°C to 125°C
+ Dispensing Metering Accuracy: ± 1% (FS)
+ Electrical Supply Voltage Power: 220 volts ± 10% 50Hz 100 watts max
+ Communication Intrfaces: USB, RS 485/ RS 232 Interface
+ Solenoides: 220Vac, 20 Watt (Ex)
+ Power Junction Box: Explosion proof, IP 65
LMH Priority Filly.Specifications + LMH 0-400 bar Pr. Transducers
+ Accurate Pr. sensing control Electronic for priority selection
+ Low & high filling priority selection
+ Independent Adjustable Pr. cut off
+ On line Pr. Display of Bank
+ Independent solenoid on each line
+ Non return valve on each line
+ Power 220 V A/C 50 Hz, 30 watts.
+ Operating Temp 0°-60°C
TESLA - EPM Regulator.Specifications:
Electric control device to reduce the natural gas pressure allowing a regular flow of gas every time the engine requires it. It is equipped with three natural gas pressure reduction stages that allow stability at both high and low pressures. The absorption of heat. taken from parts of the regulator which are heated with the liquid of the engine cooling circuit, prevents the natural gas freezing during the fall in pressure phase. It includes an electric starting device and a mechanical safety system that trips and shuts off the main flow gas pipe if the engine is switched off or even stalls.
Kioshi Vehicle Cylinder.Specifications:
JAB CNG Compressor.
* Compressor 4 stages, air cooled
* Forced libricantion for crank drive and stages
* High efficient cooling system
* High volumetric efficiency
* Maintenancfree oil and water separator
* Very Low inlet Pressure
* Ex motor 415v 3phz 50Hz
* Driect Drive
* Mini. Vibration, no Special Platform required
* High quality,robust and reliable German Technology
Controller Specification* Micro Processor based Compressor Controller
* Auto Start & Stop to preset pressure limits
* Soft Starter and Star /Delta option
* Large 1" Bold LCD Display of all Stages Pr. & Temp.
* Inlet/outlet and stages pr. & temp. monitoring
* Auto Safety Shut down, startup bypass & blowdown
* Intrinsically Safe inputs/out put
* Hour Meter installed
* Phase failure/inverter protection
* Hi performance reliable contractors
* Over Load protection
* Fault Display and Locking (Manual reset required)
* Unloading/Manifold for condensate Separation
* Auxiliary Contactors
TESLA - LPG RegulatorSpecifications
Electric control device to reduce the natural gas pressure allowing a regular flow of gas every time the engine requires it. It is equipped with two pressure reduction stages that allow stability at both high and low pressure.The absorption of heat taken from parts of the regulator which are heated with liquid of the engine cooling circuit prevent the LPG freezing during the fall in pressure phase. It includes an electric starting device and a mechanical safety system that trips and shuts off the main flow gas pipe of the engine is switched off or even stalls.
Spares Availability Country Wide Warranty 1 year (Limited)* Regulator type: 2stages with electric starting devices.
* Use automotive (suitable for vehicles with carburetor or fuel Injection.
* Heating engine cooling circuit liquid.
* Test Pressure: 500 Psi
* Inlet Pressure: 200 Psi Max
* First stage adjustment pressure: 1.5 bar
* Power supply: 12v DC (6 v Optional)
* Solenoid valve coil power capacity 12W
* For Max. Engine Capacity 50-4000cc
* Electronic choke (makes starting easy)
* Specially Designed for Asian countries
* More Torque
* More Milage
* Equally Suitable for Hilly Areas or loading vehicles
Sequential LPG Kit* Diaphragm type regulator vaporizer heating water
* Internal safety valve
* Nominal flow 35kg/hr
* Injection Rail: 3 & 4.6 cylinder
* ECU: OBD compatible
* Software controlled injection timing based on LPG . .. .. pressure & tepm, and Engine rpm, & Temp.
* Software for diagnostic and controls
Tank Valve* Inlet NRV
* 80% filling limiter device
* Outlet manual shut-off valve
* Outlet Solenoid control
* Excess flow valve
* Universal fuel level gauge (Visual & Electronic) .... .... ...light/gas (optional)
Safety* Over Pressure:27 bar
* Over Temp.: (Thermal Fuse) 120?C
* Outlet line filter
* Mounting option: 0 to 90 (confirms to E67-R1)
Tesla Industries is a private limited company formed in 1992. For the last 15 years, we have been able to establish our network of production and supply in more than 30 cities within the country and for the last 8 years the company has entered into engineering products exports and is expanding worldwide at a fast pace. Our goal at Tesla is to design and produce hi-tech sophisticated and dependable equipments, controls and safety devices for domestic and industrial uses at affordable prices thus saving and generating substantial amount of foreign exchange. Currently we are Pakistan’s largest manufacturer of CNG equipment s electrical control devices and regulation equipment. Tesla has a broad based engineering design, development, testing and hi-tech manufacturing setup that are geared towards the production and constant improvement of quality gas and electrical innovative products.
Tesla is the only Pakistani concern which has its manufacturing facility and products approved by the British Electro-technical Approvals Board and British Gas. We also have the honor of being one of such facilities in the world to carry the British Gas Logo on its relevant products. Besides these approvals, Tesla is also ISO 9001 : 2000 standard approved factory.
In addition all manufacturing and testing process comply with international standards like ISO 15500, BS 669, EN 60 335-2-73, NFPA-58 and other relevant standards. The manpower engaged in manufacturing and testing processes is also well conversant with the requirements of relevant international standards. In addition, in house training workshops are also arranged to further educate the manpower to the requirements and testing procedures laid down in international standards like ISO 15500, BS 669, EN 60 335-2-73, NFPA-58 and others.
Tesla started its journey with the indigenization of gas geyser thermostat in 1992. Gas oven thermostats, elements and thermostats for electric water heaters followed. Tesla ventured into the international market in 1999-2000. The electric heating elements and thermostats for electric water heaters are being exported to the United Kingdom along with flexible hoses, end fittings and sockets for gas appliances. Tesla is also manufacturing and exporting semi-rotary double acting hand pumps for light liquids to the U.K. market.
Tesla’s turn over for the year 2006-2007 were well above US $ 10 million and we expect this figure to increase 60% minimum this year.
As emphasis is being made on use of Compressed Natural Gas as fuel in vehicles instead of petroleum in Pakistan, Tesla has again come forward and in the CNG sector, has developed state of the art CNG equipments, such as CNG Compressor, CNG kits and Dispensers. After the approvals granted to Tesla Industries by relevant authorities concerned authorities, the number of CNG manufacturing/ sold/ installed is exceeding beyond 1500.
Tesla produces a whole range of flexible hoses with its ancillary parts for both domestic and industrial applications. Confirming to BS 331 standards, both the range of products and the production facility is certified by Advantica (British Gas). Tesla has the distinction of carrying British gas logo on this product.
Another range of Tesla’s products in the Electrical elements, which includes elements of different wattage, sizes and material suited for variety of applications including water heaters boilers, towel rail heaters and also industrial heating.
Tesla also produces a variety of steam type thermostats for different temperature ranges and applications with and without over temperature safety cut outs. Tesla’s factory is also certified BEAB (British Electrotechnical Approval Board) UK for its electric products.
Tesla has also entered into contract with a foreign manufacturer of CNG/LPG conversion kits, for the transfer of technology and manufacture of such kits in Pakistan. CNG kit is approved by OGRA Pakistan and the phased process of technology transfer and indigenization is almost complete, where as soon as government authorities approve Tesla will start production of its LPG conversion kit as well. At present Tesla is importing Kits from Hoffmann Argentina to meet the demand of the local market. The kits also conform to the applicable standards as ISO 15500 and NFPA 58.
Tesla has extended its existing range of dispenser to 2 side LPG dispensers as well. The state of the art CNG and LPG dispensers incorporate innovative LCD touch screens which enable the operators much ease in operation and provide clear visibility. The accuracy of these dispensers is well under + 1% due to the incorporation of sophisticated mass flow meters. The software installed also includes a MIS module which provides sales data at the managerial level. With Gas leakage detectors installed Tesla CNG dispensers stand way ahead in the technological competition.
Tesla is developing its infrastructure for LPG bowzers and vehicle tanks to be able to service the industry/nation when required.
Hydraulic Compressed Natural Gas Compressor is yet another product of Tesla which is far more efficient and environment friendly than those conventional ones which are currently being imported in the country. The R&D for this compressor started in collaboration with O’Green Compressors, USA and the product was approved by the OGRA Pakistan in 2004.
Tesla has also entered into contract with Kioshi Cylinders from Argentina and these cylinders are approved and being used in vehicles and as storage cascade all over Pakistan, and are the only cylinders in use in Pakistan that have been tested and approved by Powertech Labs, Canada.
The latest innovation from Tesla is the digital priority fill panel for CNG refueling stations. This innovative priority fill panel has many advantages over the conventional priority panel being used by the CNG refueling stations. The pressure sensing device provided is electronic and is far more accurate than the conventional one. This helps in more accurate selection of priority required in filling the storage unit.
Another product which is in the final stages of development is the CNG Booster for the final stage of the CNG compressor. The concept behind the development of this booster is to always maintain the high pressure side of the bank at the pressure required by the high pressure setting of the priority panel. It is so designed that it starts automatically when the fall in pressure in the high pressure bank is sensed. The speed is regulated automatically according to the requirement. This booster has the capacity to boost the initial pressure ranging from 70 psi to 3000 psi to a final pressure of 3600 psi maximum at the maximum flow rate of 500 cubic meter per hour.
Services and Warranty
Tesla is now the most credible name in the manufacturing and testing of CNG products in Pakistan. Its products are backed by after sales service warranty which is provided through the network of service centers available/ established in all of the major cities of Pakistan. Tesla has invested a lot in the building of infrastructure and service network for the CNG products. After the development of infrastructure, Tesla is now looking for new partners with whom it could venture jointly, on reciprocal basis, into the manufacturing of remaining CNG products in Pakistan to save precious foreign exchange and creates local employment with skill development in the CNG industry.