| |
| Alternative Fuel (CNG Dispenser) |
| CNG Dispenser Digital 2200-i/2100-i |
| Features |
State
of the Art CNG Dispenser incorporates.
+ The most advanced CNG 50 mass flow meter from Micromotion.
+ Large 15” LCD TFT Touch Panel Display ±
60 Viewing Angle IP 65
+ State of the art human interface. (Input &
Output)
+ Micro Processor Controlled.
+ Pie set amount fill in Rs Measuring accuracy >
98.5%
+ Max. Pr fill auto cutoff
+ Low flow rate auto cutoff . Over flow safety cutoff
+ 100% Transaction record, receipt printing. (Optional)
+ Network remote access & data retrieval. (Optional)
+ Full transaction record by date.
+ Totalizer Powerful Manager menu for data processing
(Code protected)
+ User friendly parameter setting.
+ Fast fill 1/2” line & hose.
+ Omni directional quick disconnect fill hose breakaway.
+ Progressive LM.H. Pressure filling & status
display.
+ Selection of Filling Nozzles
+ Backed by one year Warranty and Country wide after
sales service support.
+ Artificially intelligent self test and diagnostics.
+ Leakage flow detection during stand by mode.
|
|
|
| |
| Alternative Fuel (CNG Dispenser) |
| CNG Dispenser Digital 1200-i/1100-i |
| Features |
Standard CNG Dispenser incorporates.
+ The most advanced CNG SO mass flow meter
from Micromotion.
+
Large 1” LCD (with
back light)
+ Micro Processor control.
+ Pre set amount fill in Rs. Measuring accuracy>
98%
+ Max. Pr fill auto cutoff.
+ Low flow rate auto cutoff, Over flow safety
cutoff.
+ Independent Totalizers on each &de of
Rs. kg.
+ User friendly parameter settings like rate
change.
+ Fast fill 1/2“ Line & hose,
+ Omni directional quick disconnect fill hose
breakaway.
+ Progressive L.M,H, pressure filling &
status display.
+ Selection of Filling Nozzles.
+ Leakage flow detection during stand by mode.
+ Backed by one year warranty and country
wide after sales service support.
|
|
|
| |
|
| General
Specifications |
+ Two
hose, both side independent fill controlled display.
+ Vehicle tank start & final Pr, Monitoring
+ Manual Isolation valve
+ Pr, Regulator for max 200 bar filling
+ Emergency power shutoff button.
+ Electrically conductive 5000 ps max working
pressure
hose.
+ Vent Muffler (defuser), Vent recovery
line (Optional)
+ Cold rolled backea parted body, SS-Body (Optional)
+ Three line system-progressive, medium and
hi pressure filling.
+ Independent solenoid and NRV on each line.
+ 4’ Pressure Gauge
+ 10 ft filling hose
|
|
|
|
|
CNG Dispenser Digital 4200-i/4100-i |
| Technical
Specifications |
•
077 kg/min to 100 kg/min (subject to filling conditons)
+ Coalescing filters on all three lines.
+ L.M.H SOL. block for max rate with independent non return in each line
+ 4’ Pressure Gauge 400 bar max.
+ The Ambient operating temperature range is: -20°C to 60°C
+ Quick disconnect breakaway
|
 |
|
| |
|
| Technical
Parameters |
+ Medium to Meter: Compressed Natural Gas
+ Flow rate: Qmax = 100Kg /min
+ Maximum Medium Temperature: 40°C to 125°C
+ Dispensing Metering Accuracy: ± 1% (FS)
+ Electrical Supply Voltage Power: 220 volts ± 10% 50Hz 100 watts max
+ Communication Intrfaces: USB, RS 485/ RS 232 Interface
+ Solenoides: 220Vac, 20 Watt (Ex)
+ Power Junction Box: Explosion proof, IP 65
|
|
|
| |
|
